Speed hot water tap features

  The characteristics of the hot water faucet are elegant and fashionable. It can be used immediately, hot water, hot and cold, can be used for both hot and cold. It can only be temperature-controlled over-temperature protection and protective switch leakage self-control design. From the structure, the hot water faucet is adopted. The water and electricity isolation design greatly improves the safety and reliability of the hot water tap, and the heating pipe in the hot water tap has fast heat transfer, high thermal efficiency, and also has anti-pollution and anti-oxidation characteristics.

  Does the hot water tap charge?

  The power of the hot water tap generally refers to the heating tube power of the electric tap. At present, in the sanitary market, the power of the hot water tap is roughly between 1KW and 3KW, of which about 2KW is more common. In terms of the electric power of the electric faucet alone, the hot water faucet does not save electricity, and the greater the power, the more power is consumed.

  In daily life, we don't always use water, so hot water taps don't need to work all the time. Only when water is used, the faucet works only, and the hot water faucet is hot and there is no need to wait for the time to let the cold water be discharged. This saves a lot of resources and at the same time maximizes the purpose of saving electricity. It can be seen that the speed of the hot water tap is not the key to the speed of the hot water tap, but how to use it.

  Is the hot water tap safe?

  The structure of the quick faucet is very simple, including the faucet body and the water flow control switch. The faucet body is provided with a heating chamber and a control chamber, and the two are separated by a sealing plate to ensure safety. The control chamber is provided with a heating circuit, and the heating chamber is provided with a heating tube. The heating tube power is generally 2-3KW, and the hot water can be heated in 5-10 seconds.

  These products generally have overheat protection, the temperature is between 30-55 degrees, and as we take a bath, the temperature is slowly adjusted to the appropriate state, and it is impossible to adjust the faucet to the maximum temperature as soon as it is up, so Basically, you don't have to worry about burns. In addition, the electric faucet power is generally about 2800-3500 watts, which is much smaller than the electric water heater. As long as it is not a long-established old house, the general entry line can satisfy 2.5mm or more, and the circuit load is not large.

  The safety of hot water taps has always been a concern of many people. Many friends are more worried about whether the hot water faucet will conduct electricity. In fact, many fast faucet products now have a better measure to prevent leakage, which is "hydropower isolation."

  The hot faucet is also safe in insulation materials. Currently, it is a new type of insulating and heat conductive material magnesium oxide powder. It has the characteristics of high density, super fineness and full filling, so that the charged heating body is reliably separated from the outer wall, so that it is completely separated from the water. Electrical isolation. Moreover, the large brand of hot water faucet has a main body grounding, double anti-dry design and a high-sensitivity leakage protection device.

  Of course, consumers should pay attention to the following points in order to better solve the problem of the safety of hot water taps.

  1. Must purchase products with mandatory 3C certification for national product quality.

  2. Use it strictly in accordance with the instructions.

  3. The machine must be connected to an effective grounding wire.

  4. In the absence of an air switch at home, it is recommended to use a leakage protection socket.